Operation - Paragon Pro Tele-Tower 1101 Operator's Manual

Raise and rotate latch
pin to disengage and
adjust outrigger."
1) Adjust base outriggers to maintain height to base ratio
in keeping with applicable national, state, local and ANSI
Standards. ALWAYS engage the outrigger latch pin be-
fore climbing the Tele-Tower
2a) TO ELEVATE DECK:
—Retract and rotate the ladder lock spring pins to the
disengaged position.
Form 14-11-00-00 version 10
Adjustable Work Platform.
®
2b) Rotate winch handle clockwise until deck is 2" - 4"
below the desired height.
2c) —Return ALL FOUR ladder lock spring pins to the
engaging position.
—Rotate winch handle further until ALL FOUR ladder
lock spring pins engage through the holes in the guide
channels.
- 8 -
© 2019 Paragon Pro Manufacturing Solutions All Rights Reserved.

Operation