Aeotec Z-Stick Gen5 User Manual

Hide thumbs Also See for Z-Stick Gen5:

Table of Contents

Download this manual

Z-Stick Gen 5 user guide.

Modified on: Mon, 7 Jan, 2019 at 8:42 PM

Aeotec Z-Stick Gen5.

Aeotec Z-Stick Gen5 has been crafted to power connected lighting using Z-Wave Plus

(http://aeotec.com/z-wave-plus)

as a self-powered Z-Wave® USB Adapter. It is powered by Aeotec's Gen5

technology.

(http://aeotec.com/z-wave-gen5)

The technical specifications of Z-Stick Gen5

(https://aeotec.freshdesk.com/solution/articles/6000167094-z-stick-gen5-

can be viewed at that link.

technical-specifications-)

Get to Know Your Z-Stick.

Important safety information.

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited

may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be

held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

Table of Contents

Do you have a question about the Z-Stick Gen5 and is the answer not in the manual?

Page 1 Important safety information. Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be...
Page 2 Z-Stick Gen5 is intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet locations. Quick start. Z-Stick operates in three distinct modes: Inclusion-Mode, Removal- Mode and SerialAPI-Mode. Both Inclusion-Mode and Removal-Mode require Z-Stick to be unplugged from the USB connector of the host, while SerialAPI-Mode requires that Z-Stick to be plugged into the USB connector of the host.
Page 3 You are able to backup the Z-Stick Gen5 using our Z-Stick Gen5 Backup Software in any case you need to restore an older save of your network, or replace a failed Z-Stick Gen5. This way you will never have to re-do your network if there are catastrophic issues.
Page 4 2. Follow the on-screen instructions to complete installation. Disable Z-Stick Gen5 LED using Backup Tool You can disable the LED of the Z-Stick Gen5, there is only one requirement which is the use of a Windows OS to use Backup Tool.