Advertisement

System instructions
Pendix eDrive
valid only in combination with original bicycle operating instructions

Advertisement

Table of Contents
loading

Summary of Contents for Pendix Eco ePower300

  • Page 1 System instructions Pendix eDrive valid only in combination with original bicycle operating instructions...
  • Page 2: Table Of Contents

    Contents General Safety Notes ......... . 3 Introduction .
  • Page 3: General Safety Notes

    Dear Customer, Congratulations! By having attached the Always keep both hands on the handlebar when Pendix to your bicycle, your riding is now supported by an riding. Never ride hands free! Do not change the electric motor (drive system). Your bicycle is now an EPAC setting on the motor (support level) while on the (Electrically Power Assisted Cycle), also called Pedelec.
  • Page 4: Electronical And Electric Parts: Notes

    Before riding off, carefully read through the ope- tric motor of your Pendix drive system and on riding with a The prescribed operating temperature is between -10° C and rating instructions for your Pendix drive system Pedelec.
  • Page 5: Overview Components

    (3) battery ePower300 (4) battery ePower500 4. Overview components 13S2P Li-Ion 13S3P Li-Ion voltage: 48 V voltage: 48 V capacity: 331 Wh capacity: 497 Wh (5) battery holder (6) charging unit Ansmann 120 W for 48 V Li-Ion Akku input values: 100-240 V AC; 50 Hz; output values: 54.6 V DC;...
  • Page 6: Motor (Drive System)

    The battery is the power pack and central control unit of the battery being switched off (self protection system, working without gears or freewheeling. Its control is Pendix. It supplies the necessary energy for the drive system over 60 °C) and already integrated in its smart design. The Pendix motor is of the bicycle.
  • Page 7: Charging Unit

    Pendix–Ansmann 54,6 V / 2,2 A riding. 60 % of its capacity is reached. • Prevent a total discharge of the battery at all Naturally, you can continue to use it as before, though you costs. Otherwise, irreversible damage to the...
  • Page 8: Operation

    25 km/h or 15 ½ mph), support level 150 % 5.3 Setting the support steps Examples: Cycling in town, slight gradients, mostly un- With your Pendix, you have three possible support steps treated or non-solid ground available: ECO, SMART and SPORT. You can set your sys- tem to any of these using the rotating switch directly on the SPORT: High power (supports up to 25 km/h or 15 ½...
  • Page 9: Connection/Removal From Charging Unit

    5.4 Connection/removal from charging unit 5.5 Charging the battery To charge the battery, first insert the plug of the charging Charging of the battery is possible with and without power unit from below into the power station. Then connect the station.
  • Page 10: Additional Functions

    In the lower gears as required. This functions when the bicycle is not in motion In its lower section, the Pendix battery has been fitted with a you exert less energy, the support level is not so high and or when the battery is not connected: withdrawable safety lock.
  • Page 11: In The Case Of An Error

    35 km 100 % 110 km 78 km 53 km ted, please contact ,in case of battery or drive system faults, your authorized bicycle specialist or Pendix representative 70 % 50 km 36 km 25 km 70 % 77 km...
  • Page 12: Transporting Your Pedelec

    Check to see if the motor is warm. If necessary, allow it to cool down before checking to see whether it is now functioning. 8. Transporting your Do not dispose of your Pendix motor or Pendix For safety reasons, remove the battery from your Pedelec...
  • Page 13: Technical Data

    6.5 kg brushless bottom bracket motor (overall system) eDrive500 6.9 kg motor Regardless of the legal regulations, Pendix offers private Operating temperature -10° C to +50° C performance 250 W nominal consumers as the first owner of the system a two-year, Storage temperature -20°...
  • Page 14: Imprint

    Form) are only per- must be proven either in writing on the proof of purchase or • if the model, serial or product numbers on Pendix pro- missible aft er previous agreement to same in written form.
  • Page 15 Own notes...
  • Page 16 This Pendix motor (drive system) was assembled by: Pendix GmbH Innere Schneeberger Straße 20 08056 Zwickau Germany www.pendix.com...

Table of Contents