Removing The Doors - Icera St. Thomas Creations Canto Installation & Care Manual

4. REMOVE THE DOORS
Remove
Latch
REMOVAL
□ With one hand, support the door in the open position.
□ Starting with the bottom hinge, press the latch at the end of the hinge to release it from
the bracket.
□ Repeat for upper hinge.
□ Move the door forward to slide the hinges off the brackets.
REINSTALLATION
□ With one hand, support the door in the open position.
□ Starting with the top bracket, align the hinge pin with the cup of the bracket.
□ Press the back of the hinge to snap the latch onto the bracket.
□ Repeat for lower hinge.
□ Open and close the door to ensure proper operation.
Reinstall
Cup
Pin
5
5. REMOVE/REINSTALL THE DRAWERS
1. Pull out the drawer and feel underneath to locate the tabs on each side towards the front
of the drawer.
Drawer Tab
2. Push the tabs towards the edge of the drawer to release the rail-locking mechanism.
Push tab in
3. Pull drawer forward until it is fully removed from the drawer alcove.
4. To reinstall the drawers, simply align the drawer with the rail and push until you hear the
rail-locking mechanism catch.
Drawer Tab
6