Advertisement
For additional parts, contact
www.galaxyprintfinishing.com
Phone: +44(0)1618832722
The Print Finishing specialist
Instruction Manual
Components
1
Cover
2
Tool rest
3
Head screw
Pressure adjusting
4
screw
5
Paper platform
Bottom wheel
6
Rolling groove wheel
7
Right paper positioning
8
Adjusting screw
9
Left paper positioning
10
Power line
11
Power switch
12
Perforate wheel
13
(optional)
14
Creasing wheel
15
Paper press wheel
Advertisement
Table of Contents
Related Manuals for Galaxy PAC 400
Summary of Contents for Galaxy PAC 400
- Page 1 Instruction Manual Components Cover Adjusting screw Tool rest Left paper positioning For additional parts, contact Head screw Power line www.galaxyprintfinishing.com Pressure adjusting Power switch screw Perforate wheel Phone: +44(0)1618832722 Paper platform (optional) The Print Finishing specialist Bottom wheel Creasing wheel Rolling groove wheel Paper press wheel Right paper positioning...
- Page 2 1. Remove the machine 4. Insert paper/card and from the box and place adjust the creasing on a flat surface. pressure as well as feeding pressure on the paper feeding wheels 2. Adjust the creasing 5. Caution when using the machine, position and the always make sure the safety lid is indention / depth...
Need help?
Do you have a question about the PAC 400 and is the answer not in the manual?
Questions and answers