Soundstream SA.120 Owner's Manual And Installation Manual page 3

(partial)
Top view
1 2 3 5
Side view
I
Underside view
4
6 7 6 9
-
to
Key
1.
2. Ground - Main ground connection. Bolt to a clean chassis ground in the
vehicle.
3.
Remote Remote turn-on input from the head unit. Accepts +12V.
4. LED - Indicates amplifier power on.
5.
Speaker Output Connections - Channels 1 & 2
6. Crossover Output - Low level output to auxiliary amplifier for high or low
pass.
7. Bass EQ - Adjustable bass equalization circuit, Cl to +9 dB boost at 45 Hz.
6. Input Level - Variable from 100mV to 2.5V.
9. Inputs - Right and left channel inputs; only right channel input used in
"Mono" mode.
[underside] Main Fuse - Main power supply fuse. Replace only with
same fuse value.
11. [underside] Crossover S.1.P.s - Crossover frequency settings for
amplifier and crossover line outputs.
12. [underside] Stereo/Bridged Mono Switch - Select "Mono" for bridged
operation (use only right channel input) or "Stereo" for 2-channel Stereo or
Mixed Mono operation; See crossover section for more details.
[underside] Line Out Crossover Switch - Select high pass, low pass, or
13.
full range operation of crossover outputs.
[underside] Amplifier Crossover Switch - Select high pass, low pass, or
14.
full range operation of amplifier.
[underside] Bass EQ Switch - On/Off switch for bass equalization circuit.
15.