Www.auto-Sleepers.co.uk/Harmony - Auto-Sleeper Harmony User Instructional Handbook

Lighting Settings Screen
On the left side of the screen the lights to be switched on with the power button are shown.
Pressing the toggle button next to each other selects which lights will be switched on when
the power button is pressed from off to on.
Screen Settings Screen
Software version information - The screen displays all of the software version
information for each part of the system: control panel, power supply unit, EC365
communication module. As well as the unique EC635 IMEI number.
Key beep – pressing the key beep toggle button switches the key press beep off and on.
Water level alarms – pressing the water level alarm toggle button switches the water
level alarms on and off.
Screen back light level – pressing the '–' button decreases the back light brightness, while
pressing the '+' button increases the brightness
Screen time out – pressing the '–' button decreases the screen time out time, while
pressing the '+' button increases the screen time out time.
14 Harmony - Control Panel Settings
Time & Date Settings
The time and date can be changed using the plus '+' and minus '–' keys, the changes to the
time and date are saved when the screen is exited using the navigations keys.
Heating Settings
The EC700 control panel can be used to set parameters for the Truma heating system,
however we advise using the Truma CP Plus digital display (p28) to set your on-board heating.
Operation While Driving
The EC700 system is designed to shutdown parts of the system while the engine is running. This
is to meet Electromagnetic Compatibility (EMC) regulations and to ensure the safe operation of
the motorhome.
Please ensure the system shutdown switch on the PSU is in the on (button in) position before
driving (page 7). This will ensure the electronic system is active and will therefore be able to
control the charging process, supply the refrigerator and monitor other system circuits.
Where fitted; designated 12V sockets, en-route reading lights and en-route heating will remain
operational while the engine is running.

www.auto-sleepers.co.uk/harmony

Harmony - Control Panel Settings 15