Activating The Time Switch - Auto-Sleeper Harmony User Instructional Handbook

Activating the
time switch
Set time switch
WARNING! Danger of toxic exhaust fumes.
The activated time switch switches on the heater even when the vehicle is parked.
The heater's exhaust can be toxic in closed spaces (e.g. garages, workshops).
If the vehicle is parked in closed rooms:
• Shut off the fuel supply (gas or diesel) to the heater.
• Deactivate the time switch of the Truma CP plus control panel (OFF).
• Switch off the heater on the Truma CP plus control panel.
Note:
• When air conditioning systems are being operated, the time switch of the Truma CP
plus control panel must only be used to clearly define the start and end time for a
required period of time.
• If the time switch has been activated (ON), the deactivate time switch menu is
displayed first (OFF).
• Select icon in menu bar (4) with rotary push button.
• Change by tapping in the setting level.
Enter start time
• Set the hours then the minutes
with the rotary push button.
Entering the end time
• Set the hours then the minutes
with the rotary push button.
42 Harmony - Activating The Time Switch
24 h mode 12 h mode
24 h mode 12 h mode
Note: If the start/end point was exceeded during entry, the operating parameters are
not taken into consideration until the next start/end point has been reached. Until then,
the operating parameters that have been set outside the time switch remain valid.
Set room temperature
• Select the heater, air conditioning system or
AUTO using the rotary push button, depending
on the appliance that is connected.
• Tap rotary push button to confirm selection.
• Select required room temperature with rotary push button.
• Tap the rotary push button to confirm the value.
Set hot water level
• Select required hot water level with rotary push button.
• Tap the rotary push button to confirm the value.
Select energy source
• Select required energy source with rotary push button.
• Tap the rotary push button to confirm the value.
Note: The select energy type menu is displayed if a heating
system with electric heating elements is connected.
Select fan level
• Select desired fan level with rotary push button.
• Tap the rotary push button to confirm the value.
Note: The Select fan level menu is only available if the heater
/ hot water level has been set. Not available with automatic air
conditioning system AUTO.
Activate time switch (ON)
• Activate time switch with rotary push button (ON).
• Tap the rotary push button to confirm the value.
Note:
• The time switch remains active until it is deactivated (OFF),
even for several days.
• If the time switch is programmed and active, the time switch
icon flashes.
Deactivate time switch (OFF)
• Change by tapping in the setting level.
• Deactivate time switch with rotary push button (OFF).
• Tap the rotary push button to confirm the value.
www.auto-sleepers.co.uk/harmony
hot
Harmony - Activating The Time Switch Harmony User Guide oduction 043 43