Changing Hot Water Level - Auto-Sleeper Harmony User Instructional Handbook

Changing the
hot water level
Hot water faster and longer
The following functions allow you to heat hot water faster and longer. Heat water for your
specific requirements.
36 Harmony - Change Hot Water Level
Change hot water level
Select icon in menu bar (3) with rotary push button.
• Change by tapping in the setting level.
• Select desired level with rotary push button.
• Tap the rotary push button to confirm the value.
OFF • Hot water generator is switched off.
a = Boiler • Hot water generator is switched on
1
b = eco • Hot water temperature 40 °C
2
c = hot • Hot water temperature 60 °C
d = boost • Targeted, rapid heating of boiler contents (Boiler priority)
1,3
for a maximum time window of 40 minutes. Then the water
temperature is kept at the higher level for two post-heating
cycles (about 62 °C) – not Combi Diesel. After reaching the
water temperature, heating of the room continues.
This symbol flashes until the required water temperature has been reached.
1
A hot water temperature can only be maintained with combined room and water heating for a
2
limited time at 40 °C. Not available for the Australian variants.
Not available with Combi Diesel.
3
www.auto-sleepers.co.uk/harmony Harmony - Change Hot Water Level Harmony User Guide oduction 037 37