Table of Contents
Advertisement
4.20
BSS V V ARICURVE™ R R EMOTE CONTROL
FIVE Monitor may be inserted into the MIDI loop of a BSS FPC-900 Varicurve™
Remote Control and Slave system (see diagram below.)
When so connected, pressing a SOLO on an Output of the FIVE Monitor will cause
the necessary MIDI command to be sent to the Remote unit to SELECT the EQ
associated with that Output, thus automatically bringing the EQ for the SOLO'ed
channel onto the remote for editing.
This feature saves time when setting up and editing the EQ parameters for a
Monitor rig, as the engineer no longer has to manually scroll through the various
slave units to find the appropriate device to edit - a press of the SOLO on the
FIVE Monitor will suffice.
Note that this function requires the Varicurve™ remote to be fitted with operating
system EPROM V1.16 or above; contact BSS for further information.
Varicurve Slave 1
Varicurve Slave 2
Varicurve Slave 3
Varicurve Slave 4
Varicurve Interface
MIDI loop
FIVE Monitor Console
Varicurve Remote
(software V1.6 or above)
Console is inserted
into the MIDI loop here
MIDI merge
processor
Logic Trigger from
output SOLO buttons
FIVE Monitor Functional Description
FPC-900
Advertisement
Table of Contents
