Control Panel - Smeg SF109 Super Start Manual

Victoria user guide

Control Panel

1 2
- Once you have the correct hour repress the control knob 3. Repeat this
process for setting the minutes.
- Leave for 5 seconds and the time will now be saved.
If at any other time you would like to change the current time, you can do
this from the standby position. Simply hold down control 3 to the right or the
left until the hours fl ash. Repeat the steps above.
Using the Main oven (bottom oven)
- Select a cooking function using control 4. Keep turning the dial until the
desired function is visible in the display screen.
- A default temperature will appear, if you would like to change this, press on
control 3, then turn up or down until the chosen temperature is selected.
- To start cooking press Control 4.
- To end cooking and to turn the oven off, hold down control 4. Only the
time will now be visible in the display screen.
Using the auxiliary oven (top oven)
* when in use the indicator light will be on.
- Using dials 1 and 2, position to select the desired time and temperature.
- Select a function using control 1.
- Select a temperature using control 2.
- To end cooking turn both dials to the upright position at 0.
The indicator light will turn off.
Display panel
Super Start guide Super Start guide
3 4
Top tips...
When using the
function you can cook sweet
and savoury at the same time as
there is notransfer of fl avours.
Super Start guide www.smeguk.com
Circulaire