Table of Contents
Advertisement
Installation Guide
DVR-50 (G)
5 Channel DVR Recorder
Video
Video loss
This enables a video loss on a particular channel or multiple channels to trigger an alarm and also to
switch display or file lock to a different channel.
Using the linkage setup, it is also possible to link this alarm to one of the 2 available trigger outputs and
additionally configure post-recording times in addition to linking the alarm to a particular camera.
The alarm snap feature is not functional on this product.
Post recording will continue to record locked video for the set time after the alarm has been cancelled.
Motion
This enables motion to be detected by the camera and trigger an alarm and switch to a chosen channel
display and lock file.
To set the motion detect area, enable the function and then click on trigger setup. Green highlighted areas
are detection areas whereas grey highlighted areas are not detected.
You are able to select the sensitivity and the detection area individually for each camera. Use the left
mouse button to drag the desired detection area on screen. If you make an error, you can clear all or part
of the detection area by click and dragging the mouse across any of the grey highlighted grid.
To back out of this menu, use the right mouse click.
Once happy with all the detection areas, click OK and Save on the main screen.
Using the linkage setup, it is also possible to link this alarm to one of the 2 available trigger outputs and
additionally configure post-recording times in addition to linking the alarm to a particular camera.
The alarm snap feature is not functional on this product.
Post recording will continue to record locked video for the set time after the alarm has been cancelled.
Cover
This enables the DVR to detect if a camera has been covered and switch the display to a chosen channel
and also to trigger an alarm and lock a recording.
Check the box to enable this feature and choose whether it reports as an event or an alarm.
By clicking the trigger setup, you can select which channels to enable this feature on and also set the
sensitivity, alarm duration and delay time before the alarm is triggered.
Using the linkage setup, it is also possible to link this alarm to one of the 2 available trigger outputs and
additionally configure post-recording times in addition to linking the alarm to a particular camera. The
alarm snap feature is not functional on this product.
Post recording will continue to record locked video for the set time after the alarm has been cancelled.
20
Advertisement
Table of Contents
