Table of Contents
Advertisement
DVR-50 (G)
5 Channel DVR Recorder
Dual Stream
This allows a separate recording stream to be enabled. This can be set to be a
mirrored recording, a sub-recording of certain channels or a recording of alarm
channels.
This can be saved to only the internal storage medium as the external SD card has
no function in this version. In mirror recording, all video parameters are set to be
the same as the main recording stream. In sub-recording you can configure separate
parameters for each channel which are independent of the main recording stream.
OSD
You are able to choose what information is shown on the recorded videos by
ticking the required parameter.
Position
IPC Setup
Configure all settings when using the IPC HD cameras. Please ensure that the IPC camera is connected
before configuring any of these options.
Channels 1-3 are reserved for analog cameras and cannot be assigned to an IPC camera, but either chan-
nel 4 or 5 can be used to display the video from a connected IPC camera. Select the desired channel by
ticking the relevant box.
Once ticked, you should click the search icon for the relevant channel. The unit will then perform a search
for a connected IPC camera. Once the camera has been found, the results will be displayed. Select the
camera by ticking the check box and click OK.
There will now be an IP address and port number displayed on the main IPC setup screen. Click save and
the camera image should now be able to be viewed in the live view.
PTZ
If using a PTZ camera then this menu can configure the various settings and protocols for control.
You are also able to test the functionality in this menu.
The position on screen where the relevant pieces of information can
be changed by clicking this button. You will then be shown a single
image with all of the information selected shown. Click and drag the
information to the desired area and click save.
Installation Guide
17
Advertisement
Table of Contents
