Converting Lemo To Ta4F; Ta5F Wiring For Lectrosonics Bodypacks (Servo Biased Wiring) - Shure TwinPlex TL47 Series User Manual

Converting LEMO to TA4F

Cable Electrical
Series
Construction Design
1.1mm cable
2-Wire
TL45- with single
(Common
LEMO conductor
Source)
and shield
TL46-
1.6mm cable
LEMO,
with 2 2-Wire
TL47-
conductors, 2 (Common
LEMO,
shield wires Source)
TL48-
and shield
LEMO

TA5F Wiring for Lectrosonics Bodypacks (Servo Biased Wiring)

Cable Electrical
Series
Construction Design
TL46-
1.6mm cable
MTQG,
with 2 3-Wire
TL47-
conductors, 2 (Source
MTQG,
shield wires Follower)
TL48-
and shield
MTQG
Replacement For Use
Polarity
Connector With
Negative
with
Shure TQG/ Termination
respect
TA4F: WA430 Dependent
to
ground
Negative
with
Shure TQG/ Termination
respect
TA4F: WA430 Dependent
to
ground
Replacement For Use
Polarity
Connector With
Positive
with Lectrosonics
respect WA435 TA5F
to bodypacks
ground
Line Art (From
Wiring
Solder Side)
Shield: Ground(1)
Red wire: Audio/
Bias(3)
8.25kΩ Resistor
between pin 2 and 3
Shield: Ground(Shell)
Shield wire:
Ground(1)
Red wire: Audio/
Bias(3)
Blue wire: Not
connected
8.25kΩ Resistor
between pin 2 and 3
Shield: Ground(Shell)
Line Art (From
Wiring
Solder Side)
Red wire: Bias(3)
Blue wire: Audio(5)
Shield wire:
Ground(1)
Shield: Ground(Shell)
Jumper between 2
and 4
Shure Incorporated
18/23