Advertisement
Filter-guide blocks
Reconfiguring your LEE100 filter holder is easy.
Insert the larger, flat end of the blue tool into the small slot in the middle of
the base of the guide block. Push the tool in until you feel resistance. You
are not prising the block loose – you are releasing a catch under the block,
which holds it in place.
Hold the tool in place, maintaining some pressure, then ease the filter
block inwards from one side only. The block should pop inwards and
separate itself from the holder. The other side will then come away easily.
If the block does not pop inwards, apply slightly more pressure on the
tool – it should be pushed inwards until you feel resistance.
Use the narrow end of
the blue removal tool to
pick out the grey cover
plate. The cover plates
vary in size, according
to whether the filter
guide block has one,
two or three slots. Keep
the plates safe with the
blocks for future use.
7
Advertisement
