Advertisement
Mounting the holder
To fit the LEE100 holder to any LEE Filters adaptor ring, first ensure the
spring release is in its neutral position, before pulling it to open the holder.
Hook the two black teeth into the adaptor ring, then slot in the other side
of the holder before letting go of the spring release. The holder will now be
fixed in place.
The LEE100 holder has been designed for one-handed operation. If you
pinch the gap between the holder body and the blue locking ring with your
thumb and forefinger, the spring release should open fully and you can
mount or remove the holder while maintaining a firm grip.
Locking dial
The LEE100 holder has an innovative three-way locking mechanism that
allows you to use the holder in a variety of ways.
2
With the blue locking dial in the neutral position,
the spring release is pulled out to allow the
holder to be attached to the adaptor ring. With
the locking dial in this position, the holder can be
knocked off the adaptor ring should you catch
it in your clothing, for example. This will protect
your camera and lens from potential damage.
Advertisement
