Installation And Setup; Getting Started; Wi-Fi Connection - Glomex CamBoat User And Installation Manual

3.

INSTALLATION AND SETUP

3.1

Getting Started

1. Connect the CamBoat™ to a 12V DC source.
THE CAMERA OPERATES WITH 12V DC ONLY.
IT IS NOT PROTECTED AGAINST SHORT-CIRCUITED AND
OVERLOADS.
IT'S RECOMMENDED TO USE A FUSE DURING THE INSTAL-
LATION.
2. Download free CamBoat™ app from Apple Store for iOS devices and from
Google Play for Android devices by scanning the QR code below. (Fig. 1)
This User Manual refers to the iOS version. The screens for the
NOTE:
Android version will differ slightly.
3. To connect CamBoat™ to internet, choose one of the following options:
- Wi-Fi (see Section 3.2 "Wi-Fi Connection")
- Ethernet cable (see Section 3.3 "Ethernet cable connection")
3.2

Wi-Fi Connection

1. When the CamBoat™ is turned on for the first time, after few minutes, it
generates a Wi-Fi Access Point named CamBoat-XXXX where XXXX is the
first part of the serial number (S/N) of the camera.
2. Connect your mobile device (smartphone, tablet etc.) to the CamBoat™
Wi-Fi network named "CamBoat-XXXX" (Fig. 2).
S WARNING
Fig. 1
53