Ethernet Cable Connection - Glomex CamBoat User And Installation Manual

11. Press Menu button on the top right corner (Fig. 11).
- Go to the section Wi-Fi and press the "Search" button.
- Choose the Wi-Fi network you want to connect to by pressing the Join
button.
- Enter the password (if needed) both in the field Password and Re-type
- Password.
- Then press the button Apply (Fig. 12A - Fig. 12B).
Fig. 11
IMPORTANT: As soon as the CamBoat™ is connected to an external Wi-Fi
Access Point, the Wi-Fi Access Point of CamBoat™ disappears.
Only after a restore to default settings, the Wi-Fi Access Point of CamBoat™
appears again on your Wi-Fi network list of your mobile device
3.3

Ethernet cable connection

1. Plug the Ethernet cable to the LAN port.
IMPORTANT: As soon as the CamBoat™ is connected to Internet via Ethernet
cable, the Wi-Fi Access Point of CamBoat™ disappears. When you unplug the
Ethernet cable, the Wi-Fi AP of CamBoat™ appears again.
Fig. 12A
59
Fig. 12B