Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Glomex CamBoat
- Page 1 VIDEO SURVEILLANCE USER AND INSTALLATION MANUAL...
-
Page 2: Table Of Contents
Camera settings ....... . . 60 CAMBOAT SETTINGS MENU ..... . 61 Video . -
Page 3: Product Overview
PRODUCT OVERVIEW CamBoat™ is the Wi-Fi HD IP security camera that allows you to monitor the area remotely wherever you are and at any time via the free IOS and Android App. With CamBoat™ you have 100% privacy, as there is no cloud connection. -
Page 4: Requirements
Requirements Power supply: 12V DC Consumption: max 230mA Operating Conditions Operating temperature: -10°C to 50°C (14°F to 122°F) IP class: IP65 (water-resistant) Connection Cables - Power supply 12Vdc - Ethernet port - Reset Button: to restore the unit to default settings, after the unit is powered up, press and hold down the button for at least 10 seconds. -
Page 5: Installation And Setup
- Ethernet cable (see Section 3.3 “Ethernet cable connection”) Wi-Fi Connection 1. When the CamBoat™ is turned on for the first time, after few minutes, it generates a Wi-Fi Access Point named CamBoat-XXXX where XXXX is the first part of the serial number (S/N) of the camera. - Page 6 Fig. 2 The CamBoat™ Wi-Fi network password is 01234567. NOTE: 3. Open the CamBoat™ app, tap the icon menu on the top left corner (Fig. 3), Fig. 3...
- Page 7 4. Go to Camera List menu and select the QR code button (Fig. 4). Fig. 4 5. Scan the QR code on CamBoat™ dome case and the camera is automati- cally added (Fig. 5). Fig. 5 To add manually CamBoat™, tap on “+”, enter the Name and the NOTE: Serial Number (placed on the dome case) in the related fields.
- Page 8 Fig. 6 6. Once the CamBoat™ is added, two lines will appear in the Camera List (Fig. 7): - Camera Settings (where camera settings can be done) - Live section (where live stream video can be watched) Fig. 7...
- Page 9 For quick access and swipe between camera views, NOTE FOR iOS USERS: you can tap the star icon for your preferred cameras in the list. 7. Tap on the Camera Settings. 8. Tap to open CamBoat™ settings (Fig. 8). Fig. 8...
- Page 10 9. Enter the following default credentials (Fig. 9): - Username: admin - Password: admin - and then press the button Ok. Fig. 9 10. Select the language (English, Italian, French, Spanish and German) (Fig. 10). Fig. 10...
-
Page 11: Ethernet Cable Connection
IMPORTANT: As soon as the CamBoat™ is connected to an external Wi-Fi Access Point, the Wi-Fi Access Point of CamBoat™ disappears. Only after a restore to default settings, the Wi-Fi Access Point of CamBoat™ appears again on your Wi-Fi network list of your mobile device Ethernet cable connection 1. -
Page 12: Live Section
2. Open the CamBoat™ App, tap the icon menu on the top left corner. Go to Camera List menu and select the QR code button (Fig. 4). Scan the QR code on CamBoat™ radome case and the camera is auto- matically added. -
Page 13: Camboat Settings Menu
- Software Upgrade - Device Information Video The CamBoat™ supports two real-time streaming videos: HD stream (higher resolution) and Standard Stream (lower resolution). The HD stream is the only available in the Live section on the App. Select the resolution you want from the drop-down menu and then press the “Apply”... -
Page 14: Information Settings
Information Settings You can choose to show or hide the on-screen display information and change the CamBoat™ name. To apply the changes, press the “Apply” button. (Fig. 14) Fig. 14... -
Page 15: Image
Image You can change the brightness, saturation, contrast and exposure by sliding the blue square on bars. Check the box to change the flip rotation and/or a mirror rotation. To apply changes, press the “Apply” button. (Fig. 15) Fig. 15... -
Page 16: Audio
Tap the “Search” button, to see a list of the available Wi-Fi networks. Join a Wi-Fi network by tapping the Join button. Enter the password (if needed) and then tap the “Apply” button (Fig. 12A - Fig. 12B). The CamBoat can be hooked up to 2.4 GHz Wi-Fi networks only. NOTE:... -
Page 17: Alarm
Alarm You can save pictures/videos both on SD card and FTP server by checking the related box. To receive e-mails with screenshot attachments, tap “Email Setting” button and make the email configuration. To configure the camera to save alarm pictures to a FTP server, tap on FTP server Settings button. -
Page 18: User
User You can change the Username and the Password for the CamBoat™. Press “Apply” button to confirm the changes. (Fig. 18) Fig. 18 The Username and the Password are valid both for Live and Camera NOTE: Settings. In case of lost password, restore CamBoat™ to factory settings. -
Page 19: Auto Snap
Auto Snap You can save pictures on SD card and FTP server by checking the related box. You can modify the Auto Snap interval [in seconds] and the FTP Snap interval [in seconds]. To apply the changes, press the “Apply” button. (Fig. Fig. -
Page 20: Timer Record
- Whether to open record: you can enable or disable the recording functionality. It's set OFF by default. If enabled (ON), CamBoat™ will record continuously videos on SD card. Old dated files are replaced when the SD card storage is full. - Stream: select which streaming video you would record. -
Page 21: Email
4.10 Email CamBoat™ is able to send e-mails to a configured e-mail address. For this function CamBoat™ must be connected to Internet. To enable this function, please set: - SMTP server name (e.g. smtp.yourdomain.com) - Server port (e.g. 587) - Safe Link (if the port 587 is set, it's recommended to use STARTTLS - Authentication: if enabled, insert the credentials Username and Password of your e-mail account. -
Page 22: Ftp
4.11 FTP CamBoat™ is able to send pictures and videos to a configured FTP server. For this function CamBoat™ must be connected to Internet. To set up this function, please fill the following field: - Server address: IP address for the FTP server... -
Page 23: Time
4.12 Time You can set the NTP server (if needed) and synchronize the time (Fig. 23). Fig. 23... -
Page 24: Software Upgrade
4.13 Software Upgrade Press on Software Upgrade. It's possible to reboot CamBoat™, restore to default factory settings and upgrade the software if an update is available. You can download the software upgrade file from NOTE: http://www.zigboat.com/product/video-surveillance/ (if there is an upgrade) press on the button “Choose file” to get the file from the phone and then tap “OK”... -
Page 25: Device Information
To download videos from the camera: 1. Use a laptop / PC to download video from CamBoat™. 2. Connect the laptop/PC to the same network the CamBoat™ is connected 3. Get the IP address of the camera from the “Device Information” section. - Page 26 6. Videos are saved into daily folders (folder name format: yyyymmdd/). 7. The recorded videos are saved into folders named as recordXXX/. 8. Tap the video you want to download. The video will be saved into your PC / laptop. 9.
-
Page 27: Warranty
2 years from date of purchase. Warranty can be in the form of repair or replacement of the unit if manufacturing defects have been found and are confirmed by Glomex or one of its affiliates. In order to validate warranty, either the original sales receipt or a copy must be provided at the time warranty is requested. - Page 28 The equipment will be replaced or repaired under warranty only and exclusively on Glomex quality department's approval. Should any dispute rise; the place of jurisdiction will exclusively be Ravenna (Italy).