Advertisement
GETTING STARTED CONTINUED
SAFETY KEY & CLIP
Your ION By Bladez treadmill is equipped with a safety key that will disable the
treadmill if it is not in place. You should attach the clip end to your clothing. The
magnet end goes into the recess of the console. If at any time you need to stop the
treadmill quickly, simply pull the safety key off the console. This will cut all power to
the treadmill and it will come to a complete stop. To resume your workout, place the
safety key back in place. You will then need to program your workout again.
BEFORE STARTING
Straddle the running belt and stand on the plastic side rails. Insert the safety key and
attach the rope to your clothing. Do not stand on the walking belt while starting or
stopping the treadmill.
KEY FUNCTIONS:
–
QUICK START
This key is used to begin any treadmill program or quick start.
–
MODE
This key is used to enter into the program mode. It is also used to change the
values on the display readout such as changing from Cal, Distance, Speed
–
STOP/RESET
This key is used to stop the treadmill at any time. Press the STOP
button and hold for 3 seconds and the treadmill will reset itself.
–
ENTER
This key is used to confirm pre-selection. It can also be used to shift from
English to Metric units or vice versa, please refer to the following:
Change from Metric to Standard or vice versa
1. Press ENTER button for 10 seconds and either "En" or "Sl" will appear in the lower
left corner of the display window.
2. Using the
select "En" for Standard or "Sl" for Metric display.
3. Press the ENTER button to lock in your change.
4. It will take 5 seconds to reset itself.
This key is used to adjust the speed on the treadmill.
It is also used to change values during programming.
This key is used to adjust the elevation on the treadmill.
It is also used to change values during programming.
INSTANT SPEED KEYS
of the Instant Speed Key buttons. Each key represents the assigned value in Miles per
hour (MPH). Choose from 1 2 4 6 8 10 MPH.
INSTANT ELEVATION KEYS
pressing one of the Instant Elevation Key buttons. Each key represents the assigned
percentage of elevations. Choose from 2 4 6 8 10 12%.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
–
You can change the speed of the treadmill by pressing one
–
You can change the elevation of the treadmill by
11
www.ebladez.com
Hide quick links:
Advertisement
