Advertisement
ASSEMBLY INSTRUCTIONS CONTINUED
9. Next place bottle holder mounting cover
(J) onto the computer rack assembly and
fasten them with 1 bolt (d) on each side.
10. Snap the rail covers (H,I) in place as
shown.
11. Connect all the wire harnesses and cables
from the bottle holder mounting cover
onto the TV console (A).
12. Place TV connected board (k) in place,
then secure console cover, rear (K) with 4
bolts (d).
13. Then place the TV display console on the
bottle holder mounting cover and fasten
them with 4 nuts (e) as shown.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
9
www.ebladez.com
Hide quick links:
Advertisement
