CDX-M620/M670
3-1. ARM (A-L) ASSY, ARM (B-L) ASSY
3-2. CAM (L)
1 Move the arm (B-L) assy in the direction of the
arrow A and the arm (A-L) assy in the direction of
the arrow B fully (full open state).
2 Align the hole (large) on the cam (L) with part C and
install the cam.
4 Turn the cam (L) clockwise and counterclockwise to
verify that both the arms are operated.
22
SECTION 3
PHASE ALIGNMENT
3 arm (A-L) assy
line
A
arm (B-L) assy
4 stop ring 1.5, type-E
2 stop ring 1.5, type-E
1 arm (B-L) assy
bracket (L) assy
3 stop ring 1.5, type-E
hole(large)
C
arm (A-L) assy
B
cam (L)