Advertisement
Technical Instructions
Document Number 155-042P25
September 10, 2018
Installation
(See Installation
Instructions 129-121
for more information.)
Dimensions
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. POWERS is a registered trademark of Siemens Industry, Inc. Other product or company names mentioned
herein may be the trademarks of their respective owners. © 2018 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
+ 1 847-215-1000
Multi-Purpose Relay with integrel bracket can be installed on panels, ducts, unit
ventilators, or any other vertical or horizontal surface. Relay also can be panel mounted to
facilitate manual adjustment. Technical Bulletin 155-246 (TB 148) shows panel mounting
arrangement.
•
Slotted base accommodates screws or bolts for direct horizontal mounting within
panel or on a flat wall surface.
•
Integral bracket allows vertical mounting with panel or on a flat wall surface.
Figure 11. Dimensions in Inches (Millimeters).
Your feedback is important to us. If you have
comments about this document, please send them
to
sbt_technical.editor.us.sbt@siemens.com
RL 243 MP Multi-Purpose Relay
Document No. 155-042P25
Printed in the USA
Page 8
Advertisement
