Configuring An Habp Client; Displaying And Maintaining Habp - H3C S5500-EI Series Operation Manual

Operation Manual – 802.1x-HABP-MAC Authentication
H3C S5500-EI Series Ethernet Switches
Follow these steps to configure an HABP server:
Enter system view
Enable HABP
Configure HABP to work
in server mode
Set the interval to send
HABP requests

3.2.2 Configuring an HABP Client

Configure HABP to work in client mode on a device connected to the administrative
device. Since HABP is enabled and works in client mode by default, this configuration
task is optional.
Follow these steps to configure an HABP client:
Enter system view
Enable HABP
Configure HABP to work
in client mode

3.3 Displaying and Maintaining HABP

Display HABP
configuration information
Display HABP MAC
address table entries
Display HABP packet
statistics
To do...
system-view
habp enable
habp server vlan vlan-id
habp timer interval
To do...
system-view
habp enable
undo habp server
To do...
display habp
display habp table
display habp traffic
Use the command...
Use the command...
Use the command...
3-2
Chapter 3 HABP Configuration
Remarks
—
Optional
Enabled by default
Required
HABP works in client
mode by default.
Optional
20 seconds by default
Remarks
—
Optional
Enabled by default
Optional
HABP works in client
mode by default.
Remarks
Available in any view
Available in any view
Available in any view