• Do not use any chemical agents for cleaning. Clean it with dry soft cloth only. 4. TECHNICAL DESCRIPTION HT-202 5.1 Home Theater Speaker System (HTSS) is designed for creating a home theater. The multichannel 5.1 amplifier built into the subwoofer enables to connect the HTSS to virtually any audio source.
Page 4
5.1 Active Home Theater Speaker System with Bluetooth HTSS design a LED display b Volume level control c MODE: input switch, Bluetooth/DVD/AUX/FM/USB/SD (pressed short); ST-BY mode (pressed long) d : next track (pressed short in the Player or Bluetooth mode); next station (pressed short in the Radio mode) : Play/Pause (pressed short in the Player or Bluetooth mode);...
Page 5
Operation Manual HT-202 Remote control a STBY: ON/OFF power switch button (ST-BY Mode) b MUTE: sound on/of c PRO-LOGIC: on/off button of the conversion mode of a stereo signal to 5.1 d RESET: return to default settings e SAVE /DEL: memorize selected frequency button (pressed short in the Radio mode);...
5.1 Active Home Theater Speaker System with Bluetooth 5. PREPARATION AND OPERATION Speaker placement • To achieve optimum sound, it’s recommended that you place the speakers according to Fig. 4. The center and front speakers should be located along an imaginary circle with the distance between the listener and the center channel speaker as a radius, and the listener’s head as the center.
Page 7
Operation Manual HT-202 Installing and connecting the FM antenna • Insert the included indoor FM antenna into the FM ANT i jack on the subwoofer rear panel, as shown in Fig. 5. Install the FM antenna in such a way that reception quality is satisfactory, and then fix the position of the antenna.
Page 8
Speaker System with Bluetooth Preparations HT-202 speaker system can be connected to virtually any audio source: DVD/CD/MP3 player, PC sound card, etc. (see connection diagram, Fig. 6). Caution! Before making any connections, make sure the MSS is off and unplugged.
Page 9
Operation Manual HT-202 Switching on • Сonnect the power cord n to the mains outlet. • Switch on the HTSS power supply with the POWER ON/OFF switch (m, ON position) on the subwoofer rear panel. Press a button on the RC or MODE c button on the subwoofer control panel, and the LED display (a, Fig.
Page 10
«BT» mode is shown on the display a. • It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone, notebook, smartphone, etc.). «HT-202», message will be displayed on the screen which it should be connected with*.
Operation Manual HT-202 6. TROUBLESHOOTING Problem Cause Solution The HTSS isn’t connected to a Check the connection. The HTSS does mains outlet. not turn on. The power switch is off. Turn on the switch. Volume level is set at minimum Adjust the volume control knob.
105 × 170 × 110 Weight, kg 6.30 Notes: • Technical specifications given in this table are supplemental information and cannot give occasion to claims. • Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.
Page 13
Роуд, № 02-02, Сингапур, 427447. Произведено под контролем «Свен Скандинавия Лимитед», 48310, Фин- ляндия, Котка, Котолахдентие, 15. Сделано в Китае. Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, № 02- 02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310.
Need help?
Do you have a question about the HT-202 and is the answer not in the manual?
Questions and answers