Sony DAV-DZ280 Operating Instructions Manual page 23

To recall the Quick Setup display
1
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display.
2
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select
then press .
The options for [SETUP] appear.
94( 99)
1( 1)
T 0: 01: 08
CUSTOM
CUSTOM
QUICK
4
Press X/x to select [QUICK], then press
.
The Quick Setup display appears.
Setting the type of video
output to match your TV
Depending on the connection of the TV
(page 16), select the type of video output of the
system.
To select the type of video signal
output from the HDMI OUT jack
When you connect the unit and the TV with an
HDMI cable, select the type of video signals
output from the HDMI OUT jack.
For details, refer also to the operating
instructions supplied with the TV/projector, etc.
1
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display.
2
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
[SETUP],
DVD VIDEO
3
Press X/x to select
then press .
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
5
Press X/x to select [HDMI SETUP], then
press .
The options for [HDMI SETUP] appear.
6
Press X/x to select [HDMI
RESOLUTION], then press
7
Press X/x to select the desired setting,
then press .
• [AUTO (1920 1080p)]: The system
×
outputs the optimal video signal for the
connected TV.
• [1920 1080i]: The system outputs 1920
×
× 1080i* video signals.
• [1280 720p]: The system outputs 1280 ×
×
720p* video signals.
• [720 480p]**: The system outputs 720 ×
×
480p* video signals.
* i: interlace, p: progressive
** Depending on the area, [720 × 480/576p] may
appear.
[SETUP],
.
23
GB