Invitrogen Qubit 2.0 User Manual page 11

Getting Started,
Date and Time
Setup
Adjusting
Screen
Brightness
Continued
The date and time is already preset when you receive the
instrument. To reset the date and time, follow these steps:
1. Press Date/Time. The Date/Time Properties Screen contains
6 roller wheels that respond to movement of a finger across the
screen as if they were wheels.
2. Select the date and time by bringing the desired value to the
center position on the roller wheel. Press Set to make the
date/time changes. The updated date/time is displayed on the
top of the window.
Note: If you select Cancel, your changes are not saved and the
instrument returns to the screen that was last displayed.
To adjust the screen brightness, press the Brightness button (
located on the top right of the touch screen and move the slider bar
to the desired brightness level.
11
Continued on next page
)