Cantilever Mounting Kit (Optional) - Adaptive Micro Systems Alpha 4000 RGB MNS B Series Installation Manual

Cantilever mounting kit (optional)

Guidelines
This kit is only available for the 4080 MNS units and will
include one side wall mounting arm (A) which will be
attached to the customers wall via two or four 3/8" lag
bolts. Lag bolts will not be provided with this kit at this
time. Also included with this kit will be two or four sign
mounting brackets (B) and two or four 6-32 thumb screws
(C), these components will be used to attach the sign to
the mounting arm as well as keep it in place. The
mounting arm is a welded assembly using 12 gauge
(.1046" thick) cold rolled steel, while the cover is .050"
thick aluminum with bendable wings to accommodate
either one or two signs. The maximum weight of two 4080
units is approximately 17 pounds.
• The hardware for attaching to the mounting surface
must be rated for the mounting surface.
• Do NOT install directly to drywall, plasterboard, or
other fragile supports.
• Hardware for attaching to the mounting surface must
be capable of supporting four times the weight of the
sign.
A 4000 RBG MNS, P E I
LPHA O NSTALLATION
B
M (PN 1776610301 R . A)
ANUAL EV
C
B
C
I
NSTALLATION
1-13