Wall Mounting Kit; Ceiling Mounting Kit (Optional) - Adaptive Micro Systems Alpha 4000 RGB MNS B Series Installation Manual

Wall mounting
B
A
B
Guidelines
Wall-mounting brackets (A) are provided with the sign.
Fasteners (B) are supplied to attach the brackets to the
sign. Tighten the fasteners to 15 in-lb. Hardware to
secure the brackets to the wall will vary based on the type
of material (e.g., concrete, brick, wood) and is not
included.
• The hardware for attaching to the mounting surface
must be rated for the mounting surface.
• Do NOT install directly to drywall, plasterboard, or
other fragile supports.
• Hardware for attaching to the mounting surface must
be capable of supporting four times the weight of the
sign.
• The wall (or a wall-mounted support system) must be
capable of supporting at least four times the weight of
the sign.
A 4000 RBG MNS, P E I
LPHA O NSTALLATION

Ceiling mounting kit (optional)

1776250101
Guidelines
This kit will include two ceiling mounting brackets (A),
which will be attached to the units via four 6-32 screws
(B). This kit will allow the customer to hang the sign with
the appropriate braided wire or chain or rope, etc. The
mounting wire/chain will not be provided with this kit at
this time. The maximum weight of the 4160 unit is
approximately 14 pounds. Hardware to secure the sign to
the ceiling will vary based on the type of ceiling material
(e.g., concrete, brick, wood) and is not included. Hanging
chains are not included.
•
•
•
•
M (PN 1776610301 R . A)
ANUAL EV
B
A
The hardware for attaching to the mounting surface
must be rated for the mounting surface.
Do NOT install directly to drywall, plasterboard, or
other fragile supports.
Hardware for attaching to the mounting surface,
including hanging chains, must be capable of
supporting four times the weight of the sign.
The ceiling (or a ceiling-mounted support system)
must be capable of supporting at least four times the
weight of the sign.
I
NSTALLATION
B
A
1-11