Icron USB 2.0 Ranger Series User Manual page 10

USB 2.0 Ranger 140 and USB 2.0 Ranger 440
Network Cabling
The LEX unit and REX unit are interconnected by up to 50 meters of
Category 5 Unshielded Twisted Pair (UTP) cabling. The UTP cabling
must have a straight-through conductor configuration, with no
crossovers, and must be terminated with 8-conductor RJ45 connectors
at both ends.
USB
cable
computer
: Category 5 UTP cabling is the standard data communications cable
NOTE
installed in most commercial and some residential buildings.
USB Cables
USB cables have two distinct connectors. The Type A connector is used to
connect the cable from a USB device to the Type A port on a computer or
hub. The Type B connector is used to attach the USB cable to a USB device.
USB Type A USB Type A
port connector
Compatibility
The USB 2.0 Ranger complies with USB 2.0 specifications governing the
design of high-speed USB devices. However, Icron Technologies
Corporation does not guarantee that all USB devices are compatible with the
USB 2.0 Ranger.
6
LEX
Category 5 cable
AC power adapters
USB Type B
port
REX
USB
cable(s)
device(s)
USB Type B
connector
USB