Table of Contents
Advertisement
Feature
Downlink data rate
Uplink data rate
Mode of operation
R Reference point
IP connectivity
Application
QoS
PDP context
SIM
Support in the Z300
Up to 85,600 bps for packet data communication, using 4 time slots in cod-
ing scheme CS-4
Up to 21,400 bps for packet data communication, using 1 time slot in coding
scheme CS-4
Class B and Class C modes of operation supported. It is possible for the
user to choose if the Circuit Switched services should be favoured.
Physical layer: PPP is supported as L2 layer in the R reference point
Authentication algorithms PAP, CHAP supported
PDP type IP is supported
IP termination in mobile
WAP over GPRS supported (UDP/IP and GPRS-SMS)
SMS over GPRS (SMS-MT, SMS-MO) supported
QoS negotiation supported. Default requested QoS sent by the handset at
PDP context activation is reliability Class 3. Peak/Mean/Delay/Precedence
Class: subscribed.
Precedence class supported (1,2,3)
Reliability class 1-5 supported
Delay classes supported (1,2,3,4)
Mean and peak throughput rate limited by multi slot class 4 and CS-4
10 PDP context descriptions stored in mobile
PDP context description is edited via application in mobile or via OTA
Simultaneous PDP contexts not supported
Network requested PDP context not supported
GPRS aware, as well as non GPRS aware SIMs are supported
38
White Paper
Z300
October 2005
Advertisement
Table of Contents
