Page 1
NEU190 series Upright vacuum cleaner; household type Owner’s Guide Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this owner’s guide. Do not return to the store. Call Eureka Customer Service HELPLINE 1-800-282-2886.
If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Motor Do Not Oil the motor or the brush roll at any time. The bearings are permanently lubricated and sealed. www.eureka.com...
What comes in the carton Important safeguards Vacuum cleaner body and dust cup Floor nozzle Handle Upholstery tool Turbo brush Dusting brush Crevice tool Eureka Customer Service HELPLINE 1-800-282-2886...
Lower cord wrap hose retainer Retainer ring Hose inlet Power switch Floor nozzle Brushroll cover Headlights Headlights are included on select models only. For filter maintenance instructions, see page 9 Washable foam filter Belt Filter screen Dust cup Vacuum cleaner Brushroll www.eureka.com...
Twist hose Store dusting brush, upholstery tool and connection clockwise to Wrap cord onto upper crevice tool on posts on back of vacuum and lower cord wrap. cleaner. Loop hose over upper hose retainer. 'lock' position. Eureka Customer Service HELPLINE 1-800-282-2886...
Empty dust cup after every use This cleaner has a unique swivel feature that allows for easy manuevering around To empty debris, press lever Press release button and lift furniture. Twist wrist to engage to release bottom lid. off dust cup. swivel function. www.eureka.com...
Turbo brush – Use to for furniture, drapes, baseboard edges, sofas, for furniture, chairs, remove hair and debris blinds, drawers and detailing chairs, dryer vents sofas and mattresses. from stairs, rugs and vents. and tight spaces. upholstery. Eureka Customer Service HELPLINE 1-800-282-2886...
Rinse screen and dust cup. Dry all THOROUGHLY. Reassemble screen; twist clockwise to lock. Click Align tab on filter screen with Reinstall foam filter. Close cover until it clicks. slot on back of dust cup and drop into position. www.eureka.com...
• Use finger to check for debris in air path (Fig. 4). • Reinstall foam filter and filter screen inside dust cup, and position dust cup onto vacuum cleaner. Eureka Customer Service HELPLINE 1-800-282-2886...
Grasp collar and twist With cover open, use fingers or Close cover and twist counterclockwise to unlock small brush to clear accumulated collar clockwise cover. Lift cover up. hair and debris from bristles. to lock. www.eureka.com...
Make sure vacuum is turned off and power cord is unplugged. 1. Step on floor nozzle to lower handle and lay vacuum cleaner face down. 2. Use Phillips screwdriver to remove 6 screws from brushroll cover. Eureka Customer Service HELPLINE 1-800-282-2886...
Align brushroll end cap with slot so it fits into position. 7. Align right end cap of brushroll into slot 8. Align brushroll cover and snap firmly into and press into position. position. Replace 6 screws. www.eureka.com...
30 minutes before attempting to use the vacuum. 3) After the 30 minute period, plug the vacuum back in and turn on the switch. If the vacuum still does not work, call the Eureka customer service helpline. Problem Solution Motor will not start.
You will be responsible for any initial shipping and What Eureka will do: insurance charges if the defective product(s) must be Eureka will, at its option, repair or replace a defective shipped for warranty service or warranty evaluation; vacuum or vacuum part that is covered by this however, Eureka or a Eureka Authorized Warranty warranty.