Table of Contents
Advertisement
An audible signal will sound and the display will
indicate that cooking is complete.
END
Turn the adjustment knob to extend the cooking time
by setting a new duration. In both cases, the cooking
parameters will be retained.
Some functions of the oven enable you to brown the
surface of the food by activating the grill once cooking
is complete.
PRESS v TO BROWN
When the display shows the relevant message, if
required press
to start a five-minute browning cycle.
You can stop the function at any time by pressing
by turning the selection knob to "0" to switch the oven
off.
Once cooking is complete the display will prompt you
to save the function in a number between 1 and 10 on
your list of favorites.
ADD FAVORITE?
If you would like to save a function as a favorite and
store the current settings for future use, press
otherwise, to ignore the request press
been pressed, turn the adjustment knob to select the
number position, then press
To call up the functions you have saved at a later time,
turn the function knob to
list of favorite functions.
1. CONVENTIONAL
Turn the adjustment knob to select the function, confirm
by pressing
, and then press
Turn the function knob to
the display.
Smart clean
Press
to activate the function: the display will
prompt you to do all actions needed to obtain the best
. Once
has
to confirm.
: The display will show your
to activate.
to show "Smart Clean" on
cleaning results: Follow the indications and then press
when done. Once you have done all steps, when
required press
An appropriate message will start flashing on the
display once the cycle has finished. Leave the oven to
cool and then wipe and dry the interior surfaces with a
cloth or sponge.
When the oven is switched off, the display can be used
as a timer. To activate this function, make sure that the
oven is switched off and turn the adjustment knob: The
icon will flash on the display.
Turn the adjustment knob to set the length of time you
require and then press
MINUTE-MINDER
or
An audible signal will sound and the display will
indicate once the minuteminder has finished counting
down the selected time.
Once the minuteminder has been activated, you can
also select and activate a function. Turn the selection
knob to switch on the oven and then select the function
your require. Once the function has started, the timer
will continue to count down independently without
interfering with the function itself.
To lock the keypad, press and hold
seconds. Do this again to unlock the keypad.
KEYLOCK
to activate the cleaning cycle.
e
to activate the timer.
adjustment knob
selection knob
for at least five
selection knob
a
Advertisement
Table of Contents
