Advertisement
3
UPKEEP AND
TROUBLE SHOOTING
If you have questions or concerns, you are welcome to contact us at any time,
and we'll do whatever we can to help. support@echofix.com
Your EF-X2 has been designed to last - whether in a studio environment or
regularly used in a live environment, we've done everything we possibly can to
ensure that your unit will be up to the task. On your end, however, there are a few
simple measures you can take to ensure reliable and consistent performance.
• Tape echoes rely on the use of tape and parts that are designed for the
task. We have been fitting premium parts and tape to other units for years
- it hopefully goes without saying, but only use genuine Echo Fix EF-X2 parts
for the upkeep of your unit. The fitting of inferior tape or parts will void your
warranty, will adversely affect performance, and will likely damage the unit.
• Regularly clean the heads on your unit with isopropyl alcohol and and cotton
tips (cotton tips supplied). Please refer to our "how-to" guide on Youtube if
you aren't sure how to do this.
• If you are not getting expected results from the unit, please ensure that
switches A, B, C and D are positioned as follows: Direct ON, Motor ON, S
on S OFF, Echo ON. This may seem very simple, but it's surprisingly easy to
miss - even for those of us who've designed the unit. Similarly, make sure that
the corresponding input volume control for your desired input (M or N) is set
to 12 o'clock, the Echo Volume (R) is turned up, and the Feedback control (U)
is set around 11 o'clock.
• Your unit ships with a universal-voltage switch-mode power supply. This is
safe to connect to any worldwide mains voltage supply, using the correct
IEC-C7 ("Figure 8") cable for your region. If you should need to replace this
for any reason, please ensure that you use a high-quality, low-noise 24v
2amp supply with a positive centre. Of course, you can always contact us for a
replacement supply as well.
U SE R MANUAL
PAG E 8 OF 8
Advertisement
