Advertisement
2
UNDERSTANDING
THE EF-X2
ECHO MODE
4
L
GUITAR/HI-Z VOLUME
M
DIRECT
MOTOR
S.
S.
ECHO
GUITAR/HI-Z
ON
A
ON
B
ON
ON
ON
C
D
E
OFF
OFF
OFF
OFF
BASS
TREBLE
V
S
T
U
LINE VOLUME
REVERB DECAY
REVERB VOLUME
SPEED
Q
N
O
P
R
LINE
CV REMOTE SPEED
CV REMOTE FEEDBACK
REMOTE EFFECT CANCEL
F
G
H
I
A. Direct ON/OFF Switch - Switches the direct signal off or on. For traditional
echo operation (wet + dry signal), set to "ON". For wet-only, set to "OFF".
B. Motor ON/OFF Switch - Allows you to turn the tape drive motor on or off.
This is useful for achieving slow down/tape stop effects, or to increase tapelife
when using the EF-X2 as a preamp or for reverb effect only.
C. Sound On Sound ON/OFF Switch - Activates an additional playback head,
positioned at the unit's longest possible delay time, in addition to your current
"speed" setting.
D. Echo ON/OFF Switch - Bypasses the echo record circuit, allowing you to
use the unit as a preamp and reverb effect only. It is also recommended to turn
"Echo Volume" (R) all the way down when using the unit in this way.
FEEDBACK
E. Guitar/Hi-Z Input - a dedicated instrument-level input with a FET preamp
ECHO VOLUME
ON
circuit. Input gain is controlled by M.
W
F. Line input - Dedicated mono line-level input. Input gain is controlled by N.
OFF
OUTPUT
OUTPUT LEVEL
HIGH
J
K
Please note that inputs "E" and "F" can be used simultaneously if required.
LOW
G. CV Remote Speed - Allows for control of the unit "speed" function using
control voltages, including any TRS expression pedal. Connecting a CV source
to this input will disable the "Speed" control (Q).
H. CV Remote Feedback - Allows for control of the unit "feedback" function
using control voltages, including any TRS expression pedal. Connecting a CV
source to this input will disable the "Feedback" control (U).
U SE R MANUAL
PAGE 5 O F 8
Advertisement
