Greenheck SP-AP0511WL Installation, Operation And Maintenance Manual page 7

8. Finish ceiling work. Ceiling hole to be aligned with
the inside edges of the flange. See Fig. 8
inches (mm)
Fig. 8
IMPORTANT
After finishing the ceiling
work, fill gap between
flange and ceiling with
caulk or other sealant
to prevent air leakage.
9. Insert mounting springs into slots and mount grille to
fan body. See Fig. 9
Slot
Ceiling
Grille
Fig. 9
®
10. For model SP-AP0511WL, with light
• Before turning on the light, make sure the plug is
fully engaged.
Caulk
Ceiling
Caulk
Fig. 10
a. Insert the grille mounting spring on the wiring side
into the slot. See Fig. 10
b. Insert the plug into the receptacle in the housing
and insert the other mounting spring into the slot as
shown and mount grille to fan body.
See Fig. 10 and Fig. 11
Mount carefully so that light wiring is not pinched.
Mounting
Spring
Fig. 11
CAUTION
CAUTION
Ceiling Exhaust Fans 7