Removing The Projection Lens Vpll-3003 - Sony VPLL-3003 Operating Instructions Manual

Removing the Projection
Lens VPLL-3003
• The projection lens cannot be removed unless it has
returned to the center position.
• Do not remove the AC power cord while the power
is shutting down because the lens moves to the
center position just before the power is shut down.
1
Return the projection lens to the center position.
While the projector is turned on, press the LENS
SHIFT button on the Remote Commander, then
press the RESET button on it. The projection lens
returns to the center position.
2
While pressing and holding down the LENS
RELEASE button, rotate the projection lens
counterclockwise ( 1 ) to pull out the lens straight
( 2 ).
Top of surface of the projector
LENS RELEASE
button
When removing the projection lens, carry it
grasped with both hands as shown in the
illustration.
Note
When removing the projection lens, put the projector
down on the floor.
Index
Note

Removing the Projection Lens VPLL-3003

31