Alcatel Venice 5048A Service Manual page 24

L1&L2 Service Manual
rear camera1(and rubber), rear camera2, rear camera3(and rubber) and audio jack rubber are well
assembled on main PCBA.
Please distinguish the 4 cameras by following chart:
Main2 camera
Main camera
Wide camera
Camera type
Camera, Mobile Only, CMOS, 8M, FF,
6.5×6.5×H4.69 mm, FPC+BTB 5806
Front camera
30PIN, MIPI, S5K4H7YX03-FGX9,
SPY8235, N/A,N/A,N/A,S8F9074,TSP
Camera, Mobile Only, CMOS, 5M, FF,
6.5×6.5×H3.7 mm, FPC+BTB 5806
24PIN, MIPI,GC5035-WC1X0,PC5387-
65HD,N/A,N/A,N/A,9F506B,SHINETEC
Main2 camera
H
Camera, Mobile Only, CMOS, 16M, AF,
8.8×8.8×3.88 mm, FPC+PCB 5806BTB
Main camera 30PIN, MIPI, OV16E10-GA5A, 39224A-
400, VI26Z604, DW9714A, For
MorganTMO, ODP9067,TSP
Camera, Mobile Only, CMOS,
8M,FF,8.0×8.0×H5.18 mm, FPC+BTB
5806 30PIN, MIPI, GC8034-WC1X0,
Wide camera
DP0809B-20, N/A, N/A, N/A, K8F9078,
TSP
Rev.: 1.0 Venice 5048A_I_U_Y & 5148A_I Level 1 & Level 2 Service Manual
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Front camera
Camera description
TCL
Communication Ltd.
Sample pic
letter "F"
letter "D"
letter "W"
letter "S"
Remark
1. Make sure front
camera rubber is well
assembled on camera
before assembly
1. Make sure conductive
tape is well assembled on
furnished underfilling
before assembly;
2. Remember to
assemble 5M CAM
rubber.
1. Make sure conductive
tape is well assembled on
camera before assembly;
please refer to following
note to paste tape.
1. Make sure conductive
tape is well assembled on
furnished underfilling
before assembly;
2. Remember to
assemble 8M CAM
Page: 24/32