LG RD19GQGC1 Owner's Manual page 22

1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 22
SMART FUNCTIONS
22
Wireless LAN Module Specifications
Model
Frequency Range
Output Power(Max)
Open Source Software Notice Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred li-
cense terms, warranty disclaimers and copy-
right notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
LCW-003
2412 to 2472 MHz
IEEE 802.11b:18.37 dBm
IEEE 802.11g:17.67 dBm
IEEE 802.11n:17.67 dBm
Smart Diagnosis™ Using a Smart
Phone
• For appliances with the
Use this function if you need an accurate diag-
nosis by an LG Electronics customer informa-
tion centre when the appliance malfunctions or
fails.
Smart Diagnosis™ can not be activated un-
less the appliance is connected to power. If
the appliance is unable to turn on, then trou-
bleshooting must be done without using Smart
Diagnosis™.
1
Open the LG Smart ThinQ application on
the smart phone.
2
Select the Dehumidifier in dashboard.
3
Press Start Smart Diagnosis button.
4
Follow the instructions on the smart phone.
NOTE
• The Smart Diagnosis™ function depends on
the local call quality.
• If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
• Be sure to keep ambient noise to a minimum
or the phone may not correctly receive the
buzzer beeps from the indoor unit.
or logo