Table of Contents
Advertisement
G1G126-AB13-53
2. PROPER USE
The device is exclusively designed as a built-in device for moving air
and gases according to its technical data.
Any other or secondary use is deemed improper and constitutes a
misuse of the device.
Installations on the customer's side must meet the mechanical, thermal
and service life-related stresses that can occur.
Proper use also includes:
Use the device in DC power systems only.
●
Moving a gas/air mixture in gas burners with H gas, L gas
●
and liquid gas according to gas family 2 and 3 in accordance with
the German DVGW (German Technical and Scientific Association
for Gas and Water),
worksheet 260, in a concentration of approx. 90 % air and 10 %
gas, integrated into
an overall system which is designed specifically for operation with
this gas type.
Moving air with a density ranging from 0.9 to 1.2 kg/m³.
●
Minding the operating instructions.
●
Using the device in accordance with the permitted ambient
●
temperature, see chapter 3.5 Transport and storage conditions and
chapter .
Only using the device in stationary systems.
●
Installing the device into an overall system for moving air/gas
●
mixtures.
Commissioning the built-in component only after installation in the
●
customer unit.
Operating the device with all protective features in place.
●
Improper use
Using the device in the following ways is particularly prohibited and
may cause hazards:
Operating the device with an imbalance, e.g. caused by dirt deposits
●
or icing.
Moving a medium that contains abrasive particles.
●
Moving a highly corrosive medium.
●
Moving a medium that contains dust pollution, e.g.
●
suctioning off saw dust.
Operating the gas blower in an environment that contains
●
flammable gases or dust or combustible solids or fluids.
Moving an air/gas mixture outside an overall system
●
that fulfils the requirements described above.
Using the blower as a safety component or for taking
●
on safety-related functions.
Operation in medical equipment with a life-sustaining or lifesaving
●
function.
Contact with materials that could damage blower parts, e.g. liquids
●
during cleaning.
Operation with completely or partially disassembled or modified
●
protective features.
Exposure to radiation which could damage blower parts, e.g. strong
●
UV radiation.
Operation with external vibrations.
●
Operating the device in an explosive atmosphere.
●
Item no. 53368-5-9970 · Revision 81735 · Release 2014-01-29 · Page 3 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions
Operation with completely or partially disassembled or modified
●
protective features.
In addition, all application options that are not listed
●
under proper use.
Advertisement
Table of Contents
