Dear Customer, Thank you for preferring Simfer products. We aim to ensure that you can obtain utmost efficiency from this product made in accordance with the sense of total quality in a meticulous working environment at our modern facilities without causing any harm to the nature.
SAFETY INSTRUCTIONS This device has been produced in accordance with safety regulations. Operation in violation of the rules may cause harm to people and the device. Read the user manual carefully before operating the device. You can find important information about assembly, safety, operation and maintenance in the user manual. This way you can both protect yourself and prevent the device from getting damaged.
Page 4
SAFETY INSTRUCTIONS This device is not intended for use by physically, emotionally, and mentally disabled people (including children) or people with insufficient experience and knowledge unless a person responsible for safety of the device provides supervision and direction regarding the operation of the device.
Page 5
SAFETY INSTRUCTIONS Do not use the device for any other purpose other than the intended use. (Do not use it for drying clothes or keeping animals or plants warm) Do not attempt to clean the device using solvents or flammable liquids. (This may cause electric shock or fire) Do not use the device while sleeping or when you are away from the device.
Page 6
SAFETY INSTRUCTIONS The distance between the device and ceiling must be minimum 0.75 meters. There must be minimum 1 meter distance between the device and curtains, wood, cartons, fabrics and other materials, living organisms and other devices. No finger or any other object must be put through the protective screen. The device must not be placed right under any receptacle.
TECHNICAL FEATURES Device Equipment (Slim) Vapor discharge and water Louvers filling point Heating glass tube Holder Thermostat Heating function Protective screen Fan and Vapor function Plastic foot Device Equipment (Tower) Louvers Vapor discharge and water filling point Plastic Holder Thermostat Heating glass tube Heating function Fan and Vapor function...
TECHNICAL FEATURES Device Equipment (Slim, Tower) Vapor discharge and water filling Vapor discharge and water filling point point Plastic holder Plastic holder Lighted water level Lighted water level indicator indicator Foot assembly The foot assembly must be as indicated in the picture above. Apply pressure with your hand from the foot to the body after making sure that the protrusion on the foot corresponds to the duct.
TECHNICAL FEATURES Control Panel (Slim) level resistances (in the 1 row) level resistances (in the 1 and 4 rows) level resistances (in the 1 , and 3 rows) level resistances (all) Thermostat Turbo Fan Humidifier Control Panel (Tower) level resistances (in the 1 row) level resistances (in the 1 and 3...
TECHNICAL FEATURES Usage of the Humidifier Section (*) Option 1. Open the cover as indicated in the figure. 2. Check the water level and add enough water to the device from the opening. The water capacity is about 330 ml. 3.
TECHNICAL FEATURES Technical Table MODEL S 3100 – 3150 WT S 3000 – 3050 WT Height (A) 680 mm 705 mm Width (B) 725 mm 510 mm Depth (C) 260 mm 255 mm Supply (V/Hz) 220-240V AC, 50-60 Hz 220-240V AC, 50-60 Hz Current Draw (A) 12.2 A 11.9 A...
MAINTENANCE AND CLEANING Maintenance Careful and regular maintenance in line with the recommendations given in this manual is crucial in order to operate the device efficiently for a long time. The pollution of the reflector (reflecting mirror) and quartz glass tubes must be checked at least once a month by the user.
Check whether the switch and thermostat of the device are in correct and open position. Check whether there is any problem with the electric installation of the house. Make sure you are implementing the operating instructions correctly. If the problem continues, contact the nearest Simfer authorized service...
Need help?
Do you have a question about the S 3100 WT and is the answer not in the manual?
Questions and answers