Honda CBR150R 2018 Owner's Manual page 93

Installation
Attach the side collars to the front wheel.
1.
Position the front wheel between the fork
2.
legs and insert the front axle shaft from
the right side, through the right fork leg
and wheel hub.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Tighten the front axle nut.
3.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft)
After installing the wheel, apply the brake
4.
lever several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel dose not
rotate freely.
Tyre Puncture
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Removing Wheels
u
Continued 89