Table of Contents
Advertisement
3
FeaTures & ConTrols
Section
1. Three point hitch connection: Mounts chipper to
tractor three point hitch.
2. pTo driveline: Connects chipper to tractor PTO
shaft. Avoid driveline angles over 20 degrees on PTO
when unit is in use. NOTE: Minimum and maximum
telescoping on the PTO driveline are 18.11" and 24.49".
This will leave a 6.43" overlap. See Section 2.10 for
instructions on checking driveline length.
3. Belt guard: Never remove shield while machine is
running.
3
2
1
8
6
1
4 INCH CHIPPER
4. Chipper chute: Feed materials to be chipped through
the chipper chute.
5. leg stands: Never move machine unless the 3 point
is lifted and legs clear the ground.
6. Discharge tube: Chipped materials exit through the
rotatable discharge chute.
7. rotor shaft bearing cover: Covers rotor shaft and
bearing.
7
4
5
Advertisement
Table of Contents
