Voice Dialling - Sony Ericsson Cyber-Shot Developer's Manual

Calling
To activate voice dialling and
record names
} Settings } General } Voice control
1
} Voice dialling } Activate
2 Select the phone number to which you want to
add the voice command. Now you are going to
record a voice command such as "John mobile"
for the phone number you selected.
3 Instructions appear. Select
Add.
Lift the phone to your ear, wait for the tone
and say the command that you want to record.
The voice command is played back to you.
4 If the recording sounds ok, press Yes. If not,
No
press and repeat step 3.
5 To record another voice command for a
New voice
contact, select
steps 2-5 above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name On or Off
} Settings } General } Voice control
} Play caller
name.
This is the Internet version of the user's guide. © Print only for private use.
28
and select a contact.
New voice and press
again and repeat

Voice dialling

You can voice dial by saying a pre-recorded voice
command. Start voice dialling from standby using
the phone, a portable handsfree, a Bluetooth headset
or by saying your magic word.
To make a call from the phone
1 From standby, press and hold one of the
volume buttons.
2 Lift the phone to your ear, wait for the tone and
say the name you recorded earlier, for example
"John mobile". The name is played back to you
and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button,
or Bluetooth headset button.
The magic word
You can record a magic word and use it as a voice
command to allow totally handsfree access to voice
dialling. Instead of pressing and holding a volume
button to voice dial, you say the magic word and
then one of your recorded voice commands. The
magic word is especially suitable when using a car
handsfree kit.
Choose a long, unusual word or phrase that can easily
be distinguished from ordinary background speech.