ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories
Fig. 78: Identifying Drill Bit P/N 9814112
Courtesy of VOLVO CARS CORPORATION
Install the cover beneath the engine.
Take drill bit part no. 9814112 and carefully drill out the three holes.
File down the edges of the holes.
Remove any shavings.
NOTE:
Rustproof the hole edges thoroughly and as well any scriber markings.
Remove the cover from under the engine.
Fig. 79: Identifying Rivet Nuts In Drill Holes
Courtesy of VOLVO CARS CORPORATION
2012 Volvo C30 T-5