Network Configuration; Wi-Fi Networking - Espressif Systems ESP32-LyraTD-SYNA User Manual

!
�� Note:
Terminal users can follow the flashing instructions as available on the
2.4. Network Configuration

2.4.1. Wi-Fi Networking

1. After successfully downloading the firmware, power on the board again by pressing the
EN button.
2. To configure the network for the first time:
Turn on the bluetooth in your phone. Open Espressif's Alexa programming app and
•
click on Provision New Device. Make sure your phone has internet connectivity.
The provisioning happens over BLE (Bluetooth Low Energy). Android mandates
•
applications to have Location permission for accessing BLE. Please provide the
permission when the pop-up shows up.
• You will see the list of available devices that needs to be provisioned, namely ESP-
Alexa-WXYZ. Select the device that you wish to provision.
Espressif
!
Figure 2-5. Provision New Device
7 ! /17
2. Configuring for AVS
GitHub page.
2019.09