Related Manuals for Monte Carlo Fan Company 5VBR60 D Series
Summary of Contents for Monte Carlo Fan Company 5VBR60 D Series
- Page 1 ETL model no. :5VBR60 ’ WNER ANUAL Ceiling Fan Installation Instructions For 5VBR60XXD Series Fan READ AND SAVE THESE INSTRUCTIONS Total fan weight with light kit...
-
Page 2: Installation
ETL model no. :5VBR60 Installation AFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70- 1999), including fire-rated construction. - Page 3 ETL model no. :5VBR60 Insert downrod into yoke on top of the Fan body. Align the hole in Place the canopy on the downrod. Thread the leadwires and safety the downrod with the hole in the cable through the downrod. yoke.
- Page 4 ETL model no. :5VBR60 Loosen 2 screws and remove 1 screw Check the motor for shipping stabi- Align keyslot holes of the switch from motor plate and save. housing plate to the holes of the lizers and remove if present. Attach motor plate and twist to lock.
- Page 5 ETL model no. :5VBR60 Install 3X40 watt Candelabra base Place the glass on the fitter, install bulbs. Bulbs are NOT included. the finial cap and finial nut to the fit- ter. Tighten the finial nut securely by hand.
- Page 6 ETL model no. :5VBR60 NOTE: If you have more than 1 fan with a remote, you will have to change the DIP switch settings located above the battery of the remote. There are no DIP switch- es on the fan. Only change the FAN OFF SETTING remote DIP switches then press (Turns fan off only)
- Page 7 ETL model no. :5VBR60 Setting the dip switch and learning function of the Remote controller Turn the power on of the fan and press " set " within 60 seconds ( press and hold the set button for at least 5 seconds ). If the fan includes a light, the light will flash twice indicating the success of the learning function setting.
-
Page 8: Troubleshooting
ETL model no. :5VBR60 ROUBLE HOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart.