Introduction; Safety Notes; Warnings - NDS SUN CONTROL MPPT User Manual

1. INTRODUCTION:

This User Manual consists of many very important operative and safety instructions,
please read and understand it before using the device.

1.1 Safety Notes:

– Before each use please check the device, the connection cable and the
connector. If you detect any anomaly do not use it!It is strictly forbidden to
open the device. Repairs may only be carried out by qualified personnel using
original spare parts.
– DO NOT place the device on easily flammable surfaces or environments (ex.:
paper, cloth etc...). The overheating during the use may increase the fire risk.
– During operation, the device must be placed in a well ventilated area.
– If the cables are damaged, they must be replaced by a qualified technician to
eliminate the risk of accidents.

1.2 WARNINGS:

– Keep the device out of the reach of children.
– The device must be protected from sunlight or direct heat sources to prevent
overheating.
– DO NOT install the unit in a sealed environment, otherwise it may overheat.
– To avoid the risk of electric shock and / or fire, make sure that the power
supply and the solar panels are in good condition.
– DO NOT use the device with damaged cables and / or inadequate section.
– DO NOT use the device in an environment with high humidity or in direct
contact with splashes of water and / or liquid or in the rain.
2