Programming - BAQ kaloMAX Manual

BAQ kaloMAX

4 Programming

kaloMAX provides the facility to save frequently used combinations of revolutions and grinding
period. The combinations are identified by a program number and can be quickly recalled
when required.
After power up, the last program is active. By means of the ↑↓ buttons beneath the readout for
the program number, the desired program can be selected. The parameter for revolutions and
grinding period according to the selected program will be displayed immediately.
Building a new program:
• Adjust the number of revolutions and the grinding period.
• Press the 'ENTER' button.
• Select the desired program number. The decimal point behind the number shows, that
the programming is not yet completed. All buttons but the 'ENTER' button are disabled.
• Press 'ENTER' to complete the programming. The decimal point behind the program
number disappears.
Manual
Page 7