Caster/Caster Foot Assembly - RIDGID WD0655KR0 Owner's Manual

Caster/Caster Foot Assembly

1. Turn the dust drum upside down on the
floor.
2. Insert the caster feet into the bottom of
drum, as shown (4 places).
3. Push on the caster foot until the foot is
flush with the bottom of the dust drum.
4. Insert the caster stem into the socket of
the caster foot, as shown (4 places).
5. Push on the caster until the ball on
the caster stem is inserted all the way
into the socket. You will hear the ball
snap into the socket and the caster
will swivel easily when positioning is
correct.
6. Turn the drum upright.
Caster
Foot
Dust
Drum
Hole
5
Caster
Caster Stem
Caster Ball
Pin